Brake hose, rear, from body to differential, #1365.64.020 for Giulietta-based cars, also clutch hose for 2600 Touring. 3/8 X 24, long threaded portion is 29/32, short threaded portion is 7/16, overall length is 14 15/16. Verify these dimensions please. Not all cars were the same.

Brake hose, rear, from body to differential, #1365.64.020 for Giulietta-based cars, also clutch hose for 2600 Touring.  3/8 X 24, long threaded portion is 29/32, short threaded portion is 7/16, overall length is 14 15/16.  Verify these dimensions please.  Not all cars were the same. - E0142XB

Brake hose, rear, from body to differential... - E0142XB


each

Price: $52.60
Buy Product Online | Visit Store Home
   


 Other Items from Engine Compartment

  Boot for 5mm spark plug cable connection to distributor... - E0513X - Boot for 5mm spark plug cable connection to distributor caps
  Boot for 5mm spark plug cable to spark plug connectors... - E0513XB - Boot for 5mm spark plug cable to spark plug connectors.
  Connector, brass for 5mm spark plug wire to distributor... - E0513XC - Connector, brass for 5mm spark plug wire to distributor cap.
  Connector, brass for 5mm spark plug wire to spark... - E0513XD - Connector, brass for 5mm spark plug wire to spark plug.
  Air intake hose, 32" length, large diameter for heat... - E0028X32 - Air intake hose, 32" length, large diameter for heater, fresh air, and/or air filter. Heavy duty canvas, wire wound on rubber, finished ends.
  Air intake hose, 44" length, large diameter for heat... - E0028X44 - Air intake hose, 44" length, large diameter for heater, fresh air, and/or air filter. Heavy duty canvas, wire wound on rubber, finished ends.
  Accelerator linkage bolt with ball on one end. - E04A07080 - Accelerator linkage bolt with ball on one end.
  Ignition set, Bosch Plex, distrib... - EAP5454B - Ignition set, Bosch Plex, distributor without points, special coil, special spark plug wires.This set fits all 4 cylinder cars with positive ground systems.
  Carburetor hose, 10mm, vintage yellow leather wrap, with coiled wire on outside - E0177XA - Carburetor hose, 10mm, vintage yellow leather wrap, with coiled wire on outside
  Radiator supports. One rubber ring that fits on top... - E0464X - Radiator supports. One rubber ring that fits on top of another rubber section that has a central projection.
  Hose clamp strapping 5 mm  - Hose clamp strapping 5 mm (sold per foot )

 

  Return To Re-Originals, Inc. - Restoration Headquarters

 

 

Ecommerce
E-commerce powered by MonsterCommerce shopping cart.